Description
Item # AP10902
Core Charge: $0.00Manufacturer: AIRPARTSDescription: OEM # 55111411AA, 55111411AC, 55111411AD, 55111411AG, 55111411AH
/ New AC Compressor
Shipping Weight: 16.0 lbs
2 Years Warranty
New Halla HS18 Air Conditioning A/C Compressor Complete With 8 Groove Clutch Assembly For
Dodge Ram 2500 And Ram 3500 Pickup Truck Turbo Diesel.
Free Drier Accumulator
Free OIL
Years |
Make |
Model |
Engine Type |
Liter |
Fuel |
2006 – 2007 |
Dodge |
Ram 2500 Laramie |
L6 |
5.9 |
DIESEL |
2007 – 2009 |
Dodge |
Ram 2500 Laramie |
L6 |
6.7 |
DIESEL |
2006 – 2007 |
Dodge |
Ram 2500 SLT |
L6 |
5.9 |
DIESEL |
2007 – 2009 |
Dodge |
Ram 2500 SLT |
L6 |
6.7 |
DIESEL |
2006 – 2007 |
Dodge |
Ram 2500 Sport |
L6 |
5.9 |
DIESEL |
2006 – 2009 |
Dodge |
Ram 2500 ST |
L6 |
5.9 |
DIESEL |
2007 – 2009 |
Dodge |
Ram 2500 ST |
L6 |
6.7 |
DIESEL |
2008 – 2009 |
Dodge |
Ram 2500 SXT |
L6 |
6.7 |
DIESEL |
2006 – 2007 |
Dodge |
Ram 2500 TRX4 |
L6 |
5.9 |
DIESEL |
2006 – 2007 |
Dodge |
Ram 3500 Laramie |
L6 |
5.9 |
DIESEL |
2007 – 2009 |
Dodge |
Ram 3500 Laramie |
L6 |
6.7 |
DIESEL |
2006 – 2007 |
Dodge |
Ram 3500 SLT |
L6 |
5.9 |
DIESEL |
2007 – 2009 |
Dodge |
Ram 3500 SLT |
L6 |
6.7 |
DIESEL |
2006 – 2007 |
Dodge |
Ram 3500 Sport |
L6 |
5.9 |
DIESEL |
2007 |
Dodge |
Ram 3500 Sport |
L6 |
6.7 |
DIESEL |
2006 – 2009 |
Dodge |
Ram 3500 ST |
L6 |
5.9 |
DIESEL |
2007 – 2009 |
Dodge |
Ram 3500 ST |
L6 |
6.7 |
DIESEL |
2008 – 2009 |
Dodge |
Ram 3500 SXT |
L6 |
6.7 |
DIESEL |
2007 |
Dodge |
Ram 3500 TRX4 |
L6 |
5.9 |
DIESEL |
WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation.
Failure to follow these instructions may result in possible serious or fatal injury.
1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system.
3. Remove the accessory drive belt. See Below.
5. Disconnect the refrigerant line assembly from the A/C compressor and remove and discard the O-ring seals and gasket.
6. Install plugs in, or tape over all of the opened refrigerant line fittings and compressor ports.
7. Disconnect the wire harness from the clutch field coil wire lead connector (4).
8. Remove the four bolts (1) that secure the A/C compressor (2) to the mounting bracket (3) located on the right side of the cylinder block (4).
9. Remove the A/C compressor from the engine compartment.
Reviews
There are no reviews yet.