Description
ITEM DESCRIPTION
Item # AP10902
Core Charge: $0.00Manufacturer: AIRPARTSDescription: OEM # 55111411AA, 55111411AC, 55111411AD, 55111411AG, 55111411AH
/ New AC Compressor
Shipping Weight: 22.0 lbs
2 Years Warranty
New Halla HS18 Style Air Conditioning A/C Compressor Complete With 8 Groove Clutch Assembly For Dodge Ram 2500 And Ram 3500 Pickup Truck Turbo Diesel.
New Replacement HS18 – 8 Groove Clutch Assembly – 4.75″ Pulley Diameter, .85″ Gauge Line – 4 Boss Direct Mount
APPLICATIONS
Included in this package is:
Years
Make
Model
Engine Type
Liter
Fuel
2006 – 2007
Dodge
Ram 2500 Laramie
L6
5.9
DIESEL
2007 – 2009
Dodge
Ram 2500 Laramie
L6
6.7
DIESEL
2006 – 2007
Dodge
Ram 2500 SLT
L6
5.9
DIESEL
2007 – 2009
Dodge
Ram 2500 SLT
L6
6.7
DIESEL
2006 – 2007
Dodge
Ram 2500 Sport
L6
5.9
DIESEL
2006 – 2009
Dodge
Ram 2500 ST
L6
5.9
DIESEL
2007 – 2009
Dodge
Ram 2500 ST
L6
6.7
DIESEL
2008 – 2009
Dodge
Ram 2500 SXT
L6
6.7
DIESEL
2006 – 2007
Dodge
Ram 2500 TRX4
L6
5.9
DIESEL
2006 – 2007
Dodge
Ram 3500 Laramie
L6
5.9
DIESEL
2007 – 2009
Dodge
Ram 3500 Laramie
L6
6.7
DIESEL
2006 – 2007
Dodge
Ram 3500 SLT
L6
5.9
DIESEL
2007 – 2009
Dodge
Ram 3500 SLT
L6
6.7
DIESEL
2006 – 2007
Dodge
Ram 3500 Sport
L6
5.9
DIESEL
2007
Dodge
Ram 3500 Sport
L6
6.7
DIESEL
2006 – 2009
Dodge
Ram 3500 ST
L6
5.9
DIESEL
2007 – 2009
Dodge
Ram 3500 ST
L6
6.7
DIESEL
2008 – 2009
Dodge
Ram 3500 SXT
L6
6.7
DIESEL
2007
Dodge
Ram 3500 TRX4
L6
5.9
DIESEL
WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow these instructions may result in possible serious or fatal injury.
1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system.
3. Remove the accessory drive belt. See Below.
5. Disconnect the refrigerant line assembly from the A/C compressor and remove and discard the O-ring seals and gasket.
6. Install plugs in, or tape over all of the opened refrigerant line fittings and compressor ports.
7. Disconnect the wire harness from the clutch field coil wire lead connector (4).
8. Remove the four bolts (1) that secure the A/C compressor (2) to the mounting bracket (3) located on the right side of the cylinder block (4).
9. Remove the A/C compressor from the engine compartment.